Edge S MAX – 261kWh Energy Storage Cabinet
261kWh Energy Capacity
Provides high-capacity integrated battery storage, with a rated system power of 125kW for commercial applications.
Up to 92.9% Efficiency
Achieves up to 92.9% maximum cycle efficiency under specified conditions of 0.5P and 25°C.
Intelligent Hybrid Cooling
Wind-liquid coupled intelligent cooling adapts temperature management to operating conditions, supporting system efficiency and battery performance.
Advanced Safety Protection
Combines cabinet-level aerosol fire suppression, water-based fire protection and integrated smoke and temperature detection.
Specifications
General system specifications
| Specification | Details |
|---|---|
| Product name | Narada Edge S MAX |
| Product category | Commercial & Industrial Energy Storage Cabinet |
| Battery technology | Lithium Iron Phosphate (LFP) |
| Nominal energy capacity | 261kWh |
| Rated system power | 125kW |
| Rated charge/discharge rate | 0.5C/P |
| Nominal battery voltage | 832V |
| Battery configuration | 1P260S |
| Maximum cycle efficiency | 92.9% at 0.5P, 25°C |
| Battery temperature control | Wind-liquid coupled intelligent cooling |
| Nominal cooling capacity | 5,000W |
| Integrated design | PCS, BDU, BMS, EMS and thermal management system |
| Integrated solar feature | Cabinet-Top Integrated PV (CTPV) |
Battery specifications
| Specification | Details |
|---|---|
| Cell chemistry | Lithium Iron Phosphate (LFP) |
| Cell capacity | 314Ah |
| Cell configuration per module | 1P52S |
| Number of battery packs | 5 (maximum configuration) |
| Nominal voltage per battery module | 166.4V |
| Rated energy per battery module | 52.25kWh |
| Module operating voltage range | 145.6V to 187.2V |
| Continuous charge/discharge current | 157A |
| Rated charge/discharge rate | 0.5C |
| Cell balancing method | Passive cell-level balancing |
| Battery module cooling | Liquid cooling |
AC and power conversion specifications
| Specification | Details |
|---|---|
| Rated system power | 125kW |
| Rated PCS output power | 125kW |
| Maximum PCS output power | 138kW |
| Full-load DC voltage range | 680V to 950V |
| Maximum DC current | 203A |
| Rated AC voltage | 230V / 400V |
| System rated grid voltage | 380V / 400Vac |
| AC voltage deviation | -15% to +15% |
| Maximum AC current | 200A |
| Rated grid frequency | 50Hz / 60Hz (±5) |
| Power factor | 0.99 |
| Power factor range | 1 (leading) to 1 (lagging) |
| Current distortion rate | Less than 3% at rated power |
| DC component | Less than 0.5% |
| Overload capacity | 110% long-term |
| Maximum discharging efficiency | 98.5% |
| Wiring configuration | Three-phase, four-wire system |
| Grid support | L/HVRT, active and reactive power control |
Physical and environmental specifications
| Specification | Details |
|---|---|
| Cabinet dimensions (W × H × D) | 980 × 2,300 × 1,366mm |
| System weight | ≤2,500kg |
| Ingress protection rating | IP55 |
| Operating temperature | -20°C to 50°C |
| Temperature derating | Above 45°C |
| Operating humidity | 0% to 95% RH, non-condensing |
| Maximum operating altitude | 4,000m |
| Altitude derating | Above 2,000m |
| Noise level | ≤70dB |
| Cooling method | Wind-liquid coupled intelligent cooling |
| Nominal liquid cooling capacity | 5,000W |
| Grid port surge protection | Type N |
Safety and fire protection
| Specification | Details |
|---|---|
| Fire protection system | Cabinet-level fire protection |
| Fire suppression | Aerosol fire suppression |
| Additional fire protection | Water-based fire protection |
| Smoke detection | Integrated smoke detectors |
| Temperature detection | Integrated temperature detectors |
| Battery management | Integrated Battery Management System (BMS) |
| Battery circuit protection | Battery Disconnect Unit (BDU) |
| Water detection | Water immersion sensor |
| Electrical protection | AC overcurrent, overvoltage and short-circuit protection |
| Grid protection | Anti-islanding protection |
| DC protection | DC reverse connection protection |
Communication specifications
| Specification | Details |
|---|---|
| Communication interfaces | Ethernet, CAN, RS485 |
| Communication protocols | Modbus RTU, Modbus TCP, IEC 104 |
| Battery monitoring | Integrated BMS and BCU |
| Energy management | Integrated EMS |
| PCS communication | Ethernet, CAN and RS485 |
| PCS and EMS connectivity | Modbus TCP |