Edge S – 225kWh Energy Storage Cabinet
225kWh Energy Capacity
Provides substantial integrated energy storage capacity for commercial and industrial applications.
Up to 92% Efficiency
Achieves up to 92% maximum system round-trip efficiency under specified operating conditions.
Compact 1.2m² Footprint
Combines high-capacity storage within a space-efficient cabinet measuring approximately 1.2m² in floor area.
Four-Level Safety System
Features linked fire protection, aerosol fire suppression, smoke and temperature detection, and battery monitoring.
Specifications
General specifications
| Specification | Details |
|---|---|
| Product name | Narada Edge S |
| Product category | Commercial & Industrial Energy Storage Cabinet |
| Battery technology | Lithium Iron Phosphate (LFP) |
| Nominal energy capacity | 225kWh |
| Rated energy storage power | 100kW |
| Maximum system round-trip efficiency | 92% at 23°C, 400Vac |
| Cooling method | Intelligent forced-air cooling |
| Integrated design | PCS, BDU, BMS and EMS |
Battery and DC specifications
| Specification | Details |
|---|---|
| Cell chemistry | Lithium Iron Phosphate (LFP) |
| Cell specification | 3.2V / 314Ah |
| Nominal battery cluster capacity | 314Ah |
| Nominal battery cluster energy | 225kWh |
| Rated battery cluster voltage | 716.8V |
| Battery configuration | 1P224S |
| DC voltage range | 627.2V to 806.4V |
| Rated charge/discharge rate | 0.5C/P |
| Cell balancing method | Cell-level passive balancing |
| Number of battery packs | 14 |
| Individual battery pack capacity | 16.076kWh |
AC specifications
| Specification | Details |
|---|---|
| Nominal power | 100kW |
| Nominal grid voltage | 380V / 400V |
| Grid voltage range | ±15% |
| Nominal grid frequency | 50Hz / 60Hz |
| Grid frequency range | ±10% |
| AC connection method | Three-phase, three-wire (3P3W) / Three-phase, four-wire (3P4W) |
| Total harmonic distortion (THDi) | 3% at nominal power |
| Power factor range | -1 to 1 |
Physical and environmental specifications
| Specification | Details |
|---|---|
| Dimensions (W × H × D) | 1,150 × 2,400 × 1,050mm |
| Dimension qualification | Excludes air conditioner |
| Weight | ≤2,100kg |
| Floor footprint | Approximately 1.2m² |
| Ingress protection rating | IP55 |
| Corrosion protection category | C3 / C5 |
| Operating temperature | -20°C to 50°C |
| Temperature derating | Above 45°C |
| Operating humidity | 0% to 95% RH, non-condensing |
| Maximum operating altitude | 4,000m |
| Altitude derating | Above 2,000m |
| Noise level | ≤70dB |
| Cooling method | Intelligent forced-air cooling |
| Air conditioner cooling capacity | 3,000W |
Safety and protection
| Specification | Details |
|---|---|
| Fire detection | Smoke and temperature detection |
| Fire suppression | Cabinet-mounted aerosol fire suppression |
| Fire protection design | Two-level linked fire protection |
| Safety architecture | Four-level safety system |
| Grid port surge protection | Type N |
| AC overcurrent protection | Provided |
| AC overvoltage protection | Provided |
| AC surge protection | Provided |
| AC short-circuit protection | Provided |
| Anti-islanding protection | Provided |
| DC reverse-polarity protection | Provided |
| DC surge protection | Provided |
| Emergency shutdown | Emergency stop button |
| Water leakage detection | 2 sensors |
Communication specifications
| Specification | Details |
|---|---|
| Communication interfaces | Ethernet, USB, CAN, RS485 |
| Communication protocols | Modbus RTU, Modbus TCP, IEC 104 |
| Battery pack communication | Daisy chain |
| Energy management | Integrated EMS |
| Battery monitoring | Integrated BMS |
Certification standards
| Standard |
|---|
| UN 38.3 |
| IEC 62477 |
| IEC 61000 |
| IEC 60730 |
| IEC 62933 |
| IEC 62619 |